DynaColor Lite H.264 DVR Manual de usuario descargar pdf (Pagina 32)

DVR User’s Manual

3.6.8.4 Detection Configuration

If motion detection function is enabled, it is required to define the motion

detection parameters such as detection area and sensitivity settings. Select a

channel for setting the parameters, move the cursor to <Detection Config>

and press ENTER. The Detection Configuration menu displays as follows.

Detection Config

Detected Area Setup

Sensitivity

Block Threshold

88%

Detected Area Setup

After selected this item, the detected area is displayed as follows. The

detection area consists of 192 (16×12) detection grids.

Use the Direction keys to move the cursor and press ENTER to select or

de-select a grid. Press MODE to select all of the grids for detection; press

MODE again to de-select all of the grids.

Sensitivity

This item is used to set the sensitivity of detection grids for the camera. A

greater value indicates more sensitive motion detection. A motion alarm will

be triggered once the amount of motion detected exceeds the Threshold

value.

Move the cursor to <Sensitivity> and press ENTER, and then use UP/ DOWN

keys to adjust the value. The value is increased by 4% increment.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 68 69

Sin comentarios

DynaColor Lite H.264 DVR Manual de usuario Pagina 32