DynaColor SL H.264 WD1 Manual de usuario descargar pdf (Pagina 16)

DVR User’s Manual

Load Default Setting

Select <Yes> to load the default setting.

3.3 Power On / Shutdown / Reboot

If the DVR must be rebooted or shutdown for any reason, please follow the

proper shutdown procedures to avoid damaging the DVR.

Power On the Unit

After all required devices are connected, plug the power adaptor with the

power supply cord in the DVR. Make sure the power source is between AC

110V to AC 240V. After the power key on the front panel is blinking, press it to

power on the DVR.

The power LED will be lightened, and the color bar and booting logo will be

shown on the monitor, and then disappear when the unit is completely

powered on.

Shutdown / Reboot the Unit

Click on the Menu icon. Select <Shutdown> in the OSD setup menu to enter

the Shutdown menu, which displays as follows.

Shutdown

Power Off

Reboot

Power Key Privilege

Auth

Select this item to shutdown the unit. Do not remove the power during the

shutdown procedure until the monitor turns black.

Select this item to reboot the unit. The message “System rebooting…” will be

displayed on the monitor which indicates the DVR is rebooting.

According to the setting of this item, users are able to quick shutdown the

DVR by long pressing the Power Key. This item defines the action of the

Power Key. The options are <Auth>, <Confirm>, <Direct>, and <Disable>.

The following explains each option.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 73 74

Sin comentarios

DynaColor SL H.264 WD1 Manual de usuario Pagina 16