DynaColor SL H.264 WD1 Manual de usuario descargar pdf (Pagina 31)

DVR User’s Manual

3.6.4 Event Full Screen

This function allows the DVR to display the alarm channel in full-screen size

when an alarm is triggered. Select <None> to disable this function; select

<Main> to display the alarm channel on Main Monitor when an alarm is

triggered; select <Call> to display the alarm channel on Call Monitor; and

select <Both> to display the alarm channel on both Main Monitor and Call

Monitor.

3.6.5 Event Duration

This item determines the duration of the buzzer and Alarm Out relay function

after an alarm is triggered. The available event duration range is from 5

seconds to 999 seconds.

3.6.6 Per Channel Config

This menu is used to configure the <Video Loss Detect>, <Motion Detect>,

<Alarm In> and <Alarm Out> settings for each channel. The menu is

displayed as below.

Per Channel Config

Channel Select

Video Loss Detect

Motion Detect

Detection Config

Alarm In

Alarm Out

Copy Event Setting

CH01

Off

OFF

3.6.6.1 Channel Select

The item is used to select a desired channel for setting the parameters. Click

on the box next to <Channel Select> to select a channel.

3.6.6.2 Video Loss Detect

This item allows users to enable or disable Video Loss as an alarm event.

Select <On> to enable Video Loss alarm events, or <Off> to disable.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 73 74

Sin comentarios

DynaColor SL H.264 WD1 Manual de usuario Pagina 31