DynaColor S4 Guía de instalación descargar pdf (Pagina 16)

Installation Guide

3.2.4 Camera Control Protocol Setting

Define the protocol you are going to use basing on the devices of your

surveillance system. Generally, use one protocol even the devices are

provided from different manufacturers. Use the switch to set your camera

control protocol and the baud rate. Refer to the table below and turn the

arrow to choose a protocol for your Dome Camera.

The table below shows various protocols with their matching switch numbers

and baud rate.

Switch No. Protocol Baud Rate

VCL 9600

Pelco D 2400

Pelco P 4800

Chiper 9600

Philips 9600

DSCP 9600

AD422 4800

DM P 9600

Pelco D 4800

Pelco D 9600

Pelco P 2400

Pelco P 9600

JVC 9600

Kalatel-485 9600

Kalatel-422 4800

Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance,

the protocol switch should be set as follows:

Decimal Digit Single Digit

NOTE: The number “0” should locate upwards as shown in above

diagram for correct switch definition.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 54 55

Sin comentarios

DynaColor S4 Guía de instalación Pagina 16