DynaColor S4 Guía de instalación descargar pdf (Pagina 38)

Installation Guide

Follow the steps to mount the Dome Camera with the Standard/ Compact

Pendent Mount and Wall Box Mounting.

1) Make a cable entry hole on the wall to recess the cable(s).

2) Fix the Wall Box Mounting on the wall with proper screws and screw

anchors. Then run the cable(s) through the hole on the Wall Box Mounting

with the Data Cable’s 22-pin cable coming out.

3) Fasten the Standard/ Compact Pendent Mount onto the Wall Box

Mounting with the supplied screws and washers. Then thread the cable(s)

through the Standard/ Compact Pendent Mount with the cable(s) coming

out of the Pendent Mount’s outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. See the illustrations

in section 4.4.2 Compact Pendent Mount > Step 4.

4) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount.

5) Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor

Mount Kit to the Standard/ Compact Pendent Mount with the supplied

screws and washers. Then adjust the Waterproof Rubber to the joint.

6) Connect the cable(s) to the Dome Camera.

7) Join the Dome Camera to the Outdoor Mount Kit with the supplied screw

and washers.

Wall Box Mounting: Wall Box Mounting + Standard/ Compact Pendent Mount

+ Outdoor Mount Kit

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 54 55

Sin comentarios

DynaColor S4 Guía de instalación Pagina 38