DynaColor Lite H.264 DVR Manual de usuario descargar pdf (Pagina 26)

DVR User’s Manual

3.5.4 Activated

Access this item and select <Yes> to activate the connection to the IP camera.

To deactivate the connection, select <No>.

NOTE: Once the connection to the IP camera is activated, menu items

<Device Search>, <Hostname/IP>, <Model>, <Connection Setup>,

and <Copy Settings> will be grayed out and cannot be accessed.

3.5.5 Status

After the connection to the IP camera is activated, users can check the

connection status. The menu will be shown as below.

Status

Model

Streaming Format

Resolution

PPS

Bandwidth

Pkg. lost rate

ONVIF

H264(MP)

1280×720

30.00

511.37 KB/Sec

0.00%

The information shown on the monitor is “read only”.

NOTE: For an example of step-by-step IP camera setup, please refer

to Appendix G: IP Camera Installation.

3.5.6 Copy Settings

This item allows users to copy the settings set on the current selected camera

to any other connected cameras. Enter this menu and select one or more

cameras to copy the settings. Then select <CONFIRM> to apply the settings.

Copy Settings

COPY TO:

SELECT ALL DESELECT ALL CONFIRM CANCEL

NOTE: IP camera settings can only be copied to IP cameras, while

analog camera settings can only be copied to analog cameras.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

Sin comentarios

DynaColor Lite H.264 DVR Manual de usuario Pagina 26