DynaColor Lite H.264 DVR Manual de usuario descargar pdf (Pagina 52)

DVR User’s Manual

• Press ENTER to start the export the whole event video to the connected

device; or, press ESC to abort.

• If there is no exportable device connected to the DVR, then a warning

message will be shown on the screen.

4.5 Dome Control

The DVR allows users to control a dome camera via the function keys on the

front panel. In Live mode, users can press any CHANNEL key to display the

desired dome camera in full-screen. To enter Dome Control mode, press the

DOME key and a dome control panel will be displayed. To exit the Dome

Control mode and return to Live mode, press ESC or DOME.

4.5.1 Dome Connection

Follow the steps to install dome camera.

• See Setup Guide for RS-485 port pin definition.

• Connect the R+, R- terminals on the dome camera to the D+, D− terminals

on the RS-485 port by RS-485 cable respectively. Refer to the connection

figure illustrated in Setup Guide.

4.5.2 Dome Protocol Setup

The Dome Protocol lists the supported dome protocols for communicating

with dome cameras connected to the DVR. From the Main menu, select

<Camera> and press ENTER. The following menu is displayed.

Analog Camera

Analog Camera Select

Dome Protocol

Dome ID

Camera Title

Covert/Privacy Mask

Termination

Brightness

Contrast

Saturation

Hue

Audio Association

CH01

None

Ch1

Yes

To configure dome protocol, select a camera first and set the communication

protocol associated with dome camera using the Direction keys and ENTER.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

Sin comentarios

DynaColor Lite H.264 DVR Manual de usuario Pagina 52