DynaColor DH701 Guía de instalación descargar pdf (Pagina 46)

Installation Guide

Tools Needed:

• Tool for drilling

• Tool for screwing

Follow the steps below to mount the Dome Camera with the Standard

Pendent Mount.

1) Make a cable entry hole on the wall to recess the cables. Otherwise, users

could push up the cable entry board on the Standard Pendent Mount’s

mounting plate to place the cables (see the illustration in section 4.4.2

Compact Pendent Mount > Step 1).

2) Fix the Standard Pendent Mount on the wall with proper screws and screw

anchors.

3) Attach the Waterproof Rubber to the Standard Pendent Mount.

4) Run the cable(s) through the Standard Pendent Mount with the Data

Cable’s 22-pin cable coming out of the outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. See the illustrations

in section 4.4.2 Compact Pendent Mount > Step 4.

5) Thread the cable(s) through the Indoor Mount Kit and join the Indoor

Mount Kit to the Standard Pendent Mount with the supplied screws and

washers. Then adjust the Waterproof Rubber to the joint.

6) Connect the cable(s) to the Dome Camera.

7) Join the Dome Camera to the Indoor Mount Kit with the supplied screw

and washers.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 64 65

Sin comentarios

DynaColor DH701 Guía de instalación Pagina 46