DynaColor DH701 Guía de instalación descargar pdf (Pagina 55)

Installation Guide

• Pole Thin/Wide Box Mounting (optional accessory)

• Indoor Mount Kit (optional accessory)

• Waterproof Rubber (Indoor Mount Kit’s accessory)

• Stainless Steel Straps for fixing the Pole Thin/Wide Box Mounting (optional

accessory)

Tools Needed:

• Stainless Strap Cutter

• Tool for screwing

Follow the steps below to mount the Dome Camera with the Pole Thin/Wide

Box and Standard/ Compact Pendent Mount.

1) Fasten the Pole Thin/Wide Box on a pole with equipped stainless straps.

2) Run the cable(s) through the hole on the Pole Thin/Wide Box Mounting

with the Data Cable’s 22-pin cable coming out.

3) Fasten the Standard/ Compact Pendent Mount onto the Pole Thin/Wide

Box Mounting with the supplied screws and washers. Then thread the

cable(s) through the Standard/ Compact Pendent Mount with the cable(s)

coming out of the Pendent Mount’s outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. See the illustrations

in section 4.4.2 Compact Pendent Mount > Step 4.

4) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount.

5) Thread the cable(s) through the Indoor Mount Kit and join the Indoor

Mount Kit to the Standard/ Compact Pendent Mount with the supplied

screws and washers. Then adjust the Waterproof Rubber to the joint.

6) Connect the cable(s) to the Dome Camera.

7) Join the Dome Camera to the Indoor Mount Kit with the supplied screw

and washers.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 64 65

Sin comentarios

DynaColor DH701 Guía de instalación Pagina 55