DynaColor QIG-510 Series Guía de instalación descargar pdf (Pagina 15)

Installation Guide

3.2 Cables and Connections

The Dome Camera is supplied with one integrated 22-pin Data Cable for

connecting with the power, video, and RS-485/audio input & audio output

cables. Please read the following sections thoroughly before making

connections.

3.2.1 Cable Requirements

For operation, the Integrated High Speed Dome Cameras require video,

RS-485 and power cables as described below:

• The video cable sends video signals to a remote viewing site. Using a

coaxial cable to send video signals is recommended.

• RS-485 cable carries commands from a control device to the Dome

Cameras. A CAT 5, 24 gauge cable is recommended.

• Power supply: DC 12V/AC 24V output voltage

NOTE: Ensure power supply meets the Dome Camera’s power

requirement, or product impairment will occur. If any mistake happens,

please contact with a qualified maintenance engineer.

3.2.2 22-Pin Data Cable

The analog and network Speed Dome Cameras’ Data Cables are illustrated

as follows.

Analog Model

DC 12V Data Cable

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

Sin comentarios

DynaColor QIG-510 Series Guía de instalación Pagina 15