DynaColor QIG-510 Series Guía de instalación descargar pdf (Pagina 51)

Installation Guide

4.6.2 Pole Thin/Wide Box Mounting

Package Contents:

• M8x16 Screw x4

• Washer-8 x4

• Spring Washer x4,

• Stainless Steel Straps x4

Items Needed:

• Dome Camera

• Data Cable (supplied)

• Ethernet Cable (network Dome Camera)

• Standard/ Compact Pendent Mount and equipped items (optional

accessory)

• Pole Thin/Wide Box Mounting (optional accessory)

• Indoor Mount Kit (optional accessory)

• Waterproof Rubber (Indoor Mount Kit’s accessory)

• Stainless Steel Straps for fixing the Pole Thin/Wide Box Mounting (optional

accessory)

Tools Needed:

• Stainless Strap Cutter

• Tool for screwing

Follow the steps below to mount the Dome Camera with the Pole Thin/Wide

Box and Standard/ Compact Pendent Mount.

1) Fasten the Pole Thin/Wide Box on a pole with equipped stainless straps.

2) Run the cable(s) through the hole on the Pole Thin/Wide Box Mounting

with the Data Cable’s 22-pin cable coming out.

3) Fasten the Standard/ Compact Pendent Mount onto the Pole Thin/Wide

Box Mounting with the supplied screws and washers. Then thread the

cable(s) through the Standard/ Compact Pendent Mount with the cable(s)

coming out of the Pendent Mount’s outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. See the illustrations

in section 4.4.2 Compact Pendent Mount > Step 4.

4) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount.

5) Thread the cable(s) through the Indoor Mount Kit and join the Indoor

Mount Kit to the Standard/ Compact Pendent Mount with the supplied

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Sin comentarios

DynaColor QIG-510 Series Guía de instalación Pagina 51