DynaColor SL H.264 WD1 Información técnica descargar pdf (Pagina 18)

OSD Setup Manual

 LAN Setup

The network related settings in the LAN Setup menu are associated with the

network service type. If users select <LAN> for <LAN Select>, then the

PPPoE related menu items will not be displayed.

Select <LAN Setup> in <Network Setup> and use the virtual keyboard to set

parameters. The menu displays as follows.

LAN Setup

DHCP

Netmask

Gateway

DNS

PPPoE Account

PPPoE Password

Connect At Booting

Network Restart

192.168.1.150

255.255.255.0

192.168.1.1

0.0.0.0

Yes

- DHCP

This item allows users to obtain a dynamic IP address from DHCP

(Dynamic Host Configuration Protocol) server when the DVR boots up.

When users use DHCP, the settings are dynamic and will change

every time the DVR powers on or off.

If DHCP is enabled (On), a dynamic IP will be assigned to H.264 WD1

DVR. In this case, users do not need to configure the Ethernet settings,

including IP address, Netmask, Gateway, and DNS settings. These

items will be “read-only”.

If users wish to use a permanent address, set DHCP to <Off> to

manually set IP Address, Netmask, Gateway, and DNS. Check with the

network system administrators or IT personnel for appropriate values

for these settings.

- IP

This item is used to configure the IP (Internet Protocol) address of the

DVR. The IP address is the identifier for the DVR on a TCP/IP LAN or

WAN. Note that to set a static IP address, DHCP must be set to <Off>.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

Pepe 04 Oct 2024 | 16:28:51

Nada

DynaColor SL H.264 WD1 Información técnica Pagina 18