DynaColor SL H.264 WD1 Información técnica descargar pdf (Pagina 42)

OSD Setup Manual

< Event Full Screen >

This function allows the DVR to display the alarm channel in full-screen when an alarm is

triggered.

Select <None> to disable this function, or select <Main> to display the alarm channel on

Main Monitor when an alarm is triggered. Choose <Call> to display the alarm channel on

Call Monitor. Alternatively, select <Both> to display the alarm channel on both Main Monitor

and Call Monitor.

< Event Duration >

This item determines the duration of the buzzer and Alarm Out relay function after an alarm

is triggered. The available event duration range is from 5 seconds to 999 seconds.

< Per Channel Config >

This menu is used to configure the <Video Loss Detect>, <Motion Detect>, <Alarm In> and

<Alarm Out> settings for each channel. The menu is displayed as below.

Per Channel Config

Channel Select

Video Loss Detect

Motion Detect

Detection Config

Alarm In

Alarm Out

Copy Event Settings

CH01

Off

OFF

 Channel Select

The item is used to select a desired channel for setting the parameters. Click

the box next to <Channel Select> to select a channel.

 Video Loss Detect

This item allows users to enable or disable Video Loss as an alarm event.

Select <On> to enable Video Loss alarm events, or <Off> to disable.

 Motion Detect

This item allows users to enable or disable motion detection function of the

DVR. Select <On> to enable Motion Detect alarm events, or <Off> to disable.

If motion detection function is enabled, it is required to define motion

detection parameters, such as detection area and sensitivity settings in

<Detection Config>.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 67 68

Pepe 04 Oct 2024 | 16:28:51

Nada

DynaColor SL H.264 WD1 Información técnica Pagina 42