DynaColor SL H.264 WD1 Información técnica descargar pdf (Pagina 19)

OSD Setup Manual

- Netmask

Netmask is a 32-bit mask used to divide an IP address into subnets

and specify the networks available hosts. Its value is defined by the

network administrator. It takes the form as ***.***.***.***, for example,

255.255.255.255.

This item allows users to enter the value of the Netmask for the DVR.

Please note that to configure this item, DHCP must be set to <Off>.

- Gateway

Gateway is a node on a network that serves as an entrance to another

network. Users are allowed to specify the IP address of the gateway or

router associated with this DVR. To configure this item, DHCP must be

set to <Off>.

- DNS

DNS is the abbreviation for “Domain Name Server”, which is an

Internet service that translates domain names (e.g. www.DNS.com)

into IP addresses. The advantage of using DNS is that domain names

are easier to be memorized.

This item allows users to specify the IP address of the Domain Name

System associated with the DVR. To configure this item, DHCP must

be set to <Off>.

If the server is unavailable when DHCP is enabled, the DVR will

search for the network server and boots up more slowly. This network

search continues until it times out.

- PPPoE Account

The item allows users to setup the PPPoE login username.

NOTE: For accessing the PPPoE settings, select <PPPoE> as

the Network Type under <LAN Select>.

To setup the login username, follow the steps:

 Select <PPPoE Account> from the LAN Setup menu. A virtual

keyboard displays.

 Click to add the desired characters to the entry field.

 When it is done, click <OK> to save the setting and exit.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Pepe 04 Oct 2024 | 16:28:51

Nada

DynaColor SL H.264 WD1 Información técnica Pagina 19